产品参数：两个下摸在同一平面上左右交替移动。一模成型工作，一模在外部取件，作业安全性高，可提高生产率30%~50%。
| 机器型号 | Machine Type | Unit | TA-400DS | ||||
| 射出系统 | INJECTION SYSTEM | 螺杆直径 | Screw Diameter | mm | 28 | 32 | 35 |
| 射出压力 | Injection Pressure | kgf/cm² | 2332 | 1792 | 1494 | ||
| 理论注射容积 | Theoretical Injection Volume | cm³ | 98 | 128 | 153 | ||
| 射出重量(PS) | Max.Shot Weight(PS) | g/oz | 103/3.6 | 134/4.8 | 160/5.7 | ||
| 射出速度 | Injection speed | cm/s | 6.4 | ||||
| 温度控制段数 | Number Of Temperature Control | zone | 3 | ||||
| 锁模系统 | CLAMPING SYSTEM | 锁模力 | Clamping Force | kn | 400 | ||
| 模柱间距 | Distance Between Tie Bar | mm | 410x250 | ||||
| 上模板尺寸 | Top Platen Size | mm | 555x380 | ||||
| 下模板尺寸 | Bottom Platen Size | mm | 580x420 | ||||
| 滑板尺寸 | Sliding Platen Size | mm | 396x840 | ||||
| 最小模厚 | Min.Mold Height | mm | 195 | ||||
| 开模行程 | Opening Stroke | mm | 200 | ||||
| 最大开模间距 | Max.Opening Distance | mm | 395 | ||||
| 顶出力量 | Ejector Force | kn | 22 | ||||
| 顶出行程 | Ejector Stroke | mm | 35 | ||||
| 油压电力 | ELECTRIC HYDRAULIC SYSTEM | 最大液压压力 | Max.Hydraulic Preesure | kgf/cm² | 140 | ||
| 油箱容量 | Oil Tank Capacity | L | 180 | ||||
| 油泵电机电力 | Pump Motor Power | kw | 5.5 | ||||
| 电热容量 | Barrel Heating Power | kw | 4.2 | ||||
| 总用电量 | Total Wattage | kw | 9.7 | ||||
| 其它 | OTHERS | 机器重量 | Machine Weight | kg | 1600 | ||
| 机器外形尺寸 | Machine Dimensions | m | 1.9x1.1x2.3 | ||||
