产品参数：上模固定，下模可向操作室方向滑动，镶嵌物件放置和成品顶出均在合模区外完成，适合各种高难度镶嵌物件的放置，操作安全性高。
| 机器型号 | Machine Type | Unit | TA-1200S | |||
| 射出系统 | INJECTION SYSTEM | 螺杆直径 | Screw Diameter | mm | 45 | 50 |
| 射出压力 | Injection Pressure | kgf/cm² | 1918 | 1556 | ||
| 理论注射容积 | Theoretical Injection Volume | cm³ | 318 | 392 | ||
| 射出重量(PS) | Max.Shot Weight(PS) | g/oz | 334/11.8 | 411/14.5 | ||
| 射出速度 | Injection speed | cm/s | 9.2 | |||
| 温度控制段数 | Number Of Temperature Control | zone | 4 | |||
| 锁模系统 | CLAMPING SYSTEM | 锁模力 | Clamping Force | kn | 1200 | |
| 模柱间距 | Distance Between Tie Bar | mm | 610x510 | |||
| 上模板尺寸 | Top Platen Size | mm | 840x740 | |||
| 下模板尺寸 | Bottom Platen Size | mm | 930x800 | |||
| 滑板尺寸 | Sliding Platen Size | mm | 600x750 | |||
| 最小模厚 | Min.Mold Height | mm | 300 | |||
| 开模行程 | Opening Stroke | mm | 300 | |||
| 最大开模间距 | Max.Opening Distance | mm | 600 | |||
| 顶出力量 | Ejector Force | kn | 46 | |||
| 顶出行程 | Ejector Stroke | mm | 75 | |||
| 油压电力 | ELECTRIC HYDRAULIC SYSTEM | 最大液压压力 | Max.Hydraulic Preesure | kgf/cm² | 140 | |
| 油箱容量 | Oil Tank Capacity | L | 400 | |||
| 油泵电机电力 | Pump Motor Power | kw | 15 | |||
| 电热容量 | Barrel Heating Power | kw | 10.5 | |||
| 总用电量 | Total Wattage | kw | 25.5 | |||
| 其它 | OTHERS | 机器重量 | Machine Weight | kg | 6700 | |
| 机器外形尺寸 | Machine Dimensions | m | 2.7x1.4x3.7 | |||
